GetStatus returns incorrect information for bit-0 on an RZ2

Tech Note: TN0234
Product: RZ2, ActiveX
Version: Microcode version 62 and below
Date Added: 2007-01-07


GetStatus always returns a zero for bit-0 on an RZ2 with microcode v62 and below.


Update to latest version of TDT Drivers. After installing the drivers, reprogram the RZ2 with the new microcode. Keep in mind that reprogramming the microcode on an RZ processor will take about five minutes per DSP.


Unlike the Medusa base station, bit-0 of the GetStatus return value is not used to report PZ amplifier status. RZ users should refer to the LCD screen for amplifier status information.