Configuration Register for the RX8 device setup is not displayed

Tech Note: TN0165
Product: RX8
Version: TDT Drivers 58 and 57
Date Added: 2005-01-18


When the RX8 is selected in the RPvdsEx Device Setup (Set Hardware Parameters dialog box), the Device Configuration Registers used to configure the programmable I/O lines are not displayed.


To configure the programmable I/O lines on the RX8, first select RX6 and configure the registers as desired, then select RX8. Your configuration will be applied to the RX8.


Update to latest version of TDT Drivers.