Circuit will not work correctly after components are added or subtracted

Tech Note: TN0049
Product: RPvdsEx
Version: All
Date Added: 2002-09-24


When components are added or subtracted from a circuit, the "CmpNo" parameter on the RamBuf and HrtfCoef often need to be changed, otherwise the circuit will not work correctly. In some cases, it requires that you power cycle the hardware.


Every time the circuit is recompiled, check the "CmpNo" parameters to make sure they are set to the right value. For any circuit change, change the "CmpNo" parameters as a last step and recompile the circuit.