Tucker-Davis Technologies Electrode Specification Form

Zif Clip® Electrodes

Customer Information

* Required Fields

	Electrode Spacing

Tip Angle Specification

Blunt Cut (0 degrees)

30 degrees

45 degrees

60 degrees

Wire Diameter (All Sites)

33 um

50 um

Optional Attached G/R Wires

Ground

Reference

To operate in Single-Ended mode, attached ground and reference wires must be shorted together on the array.


	Tip Length Specification

Please select the maximum number of Rows desired		Specify tip length from 0.5 mm to 10 mm
Default is 2 Rows - 16 Channels all the same length (2 mm)		S	= Same length as the channel above
2 Rows - 16 Channels	4 Rows - 32 Channels	O	= Omit shank (removes electrode at this position)

Row 1

Check here if all lengths are the same

Row 2

Check here if all lengths are the same