Tucker-Davis Technologies Electrode Specification Form

Zif Clip® Electrodes

Customer Information

* Required Fields

Electrode Type

Standard
Flex Ribbon

Electrode Spacing

250 um

500 um

Tip Angle Specification

Blunt Cut (0 degrees)

30 degrees

45 degrees

60 degrees

Wire Diameter (All Sites)

33 um

50 um

Ground and Reference Wires

Differential

Single-Ended

For Single-Ended, a single external wire is provided (Ground and Reference pins are permanently shorted together).

Quantity

Enter the desired quantity of microwire arrays

Tip Length Specification

Please select the maximum number of Rows desired		Specify tip length from 0.5 mm to 10 mm
Default is 2 Rows - 16 Channels all the same length (2 mm)		S	= Same length as the channel above
2 Rows - 16 Channels	4 Rows - 32 Channels	O	= Omit shank (removes electrode at this position)
	8 Rows - 64 Channels

Row 1

Check here if all lengths are the same

Row 2

Check here if all lengths are the same